Styrofoam Fixing Plugs - 50mm Length - DDS044

Product description

Snail-type pins are used for fixing signs in thermal insulation materials, especially polystyrene foam. They are made of hard and temperature-resistant polyamide. They allow very fast and trouble-free installation of the signboard without drilling, using only a hand wrench. The special design of the screw and the sharp end guarantee stability and high load-bearing properties. Pins are available in sets of 2 and 4 pieces.

color: white
material: plastic - polyamide
length: 50mm
pin diameter: 25mm
screw diameter: 4mm
mounting key socket: TORX 40
compatibility: 19mm diameter aluminum spacers

OPTION DESCRIPTION:
- if your sign has two holes - choose a set of 2 pcs. (includes two dowels + two metal screws)
- if your signboard has four holes - choose a set of 4 pcs. (set of four dowels + four metal screws)
- if you do not have a TORX 40 key - select YES

We recommend installation according to the following steps:
1. Apply the sign to the wall (gently apply it so as not to scratch the sign if it is made of clear plexiglass).
2. Trace the holes in the sign with a pencil.
3. Put the sign back.
4.NOTE: Although the dowels can be installed without drill bits, we recommend to drill through the plaster layer with a 8mm drill bit and then use a TORX 40 wrench to insert the dowel precisely into the wall.
5.After all the dowels are screwed in, we apply the first spacer to the dowel in the wall and put a metal screw inside the barrel of the spacer, which is screwed in with a star screwdriver.
6After installing all the spacers, apply the sign and through the holes in the sign screw the decorative cap holding the sign.

Price is for a set of 2 or 4 pieces including screws. Price does not include aluminum spacers.

Lead time: from 2 to 5 working days. For larger orders, lead time determined individually.

We will be happy to answer your questions by email or phone.